Total Pond A16531L Guide d'installation télécharger pdf (Page 2)

• Risk of electrical shock – This pump has not been investigated for use in swimming pools or marine

areas.

CAUTION

• This pump has been evaluated for use with water only.

• Use a proper power source as indicated on the pump label.

• Keep the cord away from high temperatures or other heat sources.

• Do not pump heated liquids.

• Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.

• Do not lift the pump by its power cord.

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 30 minutes

• Tools required for assembly: container, plastic liner or sealant, drill, 1-1/4” drill bit, silicone caulk, latex

gloves.

OPERATION

INSTRUCTIONS

1. Connect the extension tubes to the pump. Fig. 1

Fig. 1

2. Choose a fountain head for the desired water effect, and assemble

your choice as shown in Fig. 2.

Fig. 2

1 2 3 4 5 6 7 8

Pas de commentaire

Total Pond A16531L Guide d'installation Page 2